Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,930 Posts
Discussion Starter #1
Friend just brought me his bow, Hoyt Magna tec Redline and wanted me to serve in a new peep, remove his metal "D" loop and get him lined up. No problem with any of that ,, but,,, I went to Hoyt's web site for specs and his is the RL-7-R-HL
Which would make it Redline HL, 75% 7" brace and the sticker on the bow says 95.5 string & 34.5 cable.. 7 which is the 31" draw and the axle to axle "should be" 37 1/4.. this one measures 38" :eek:
What can I do? I have twisted the cable about as much as I feel comfortable doing and only gained a 1/4' so now i'm sitting at 37 3/4" ATA
Also,, no timing marks on the cams??? How do you know if this thing is rotating properly?

Thanks
 

·
Registered
Joined
·
34,166 Posts
Are you sure of the year of the bow? The last year that Hoyt offered the Redline cam on that bow the A to A at his draw should be 37 5/8".
 

·
Registered
Joined
·
1,930 Posts
Discussion Starter #3
No clue on the year.. anyway to tell by the serial # ?
 

·
Registered
Joined
·
1,930 Posts
Discussion Starter #4
From what I see,, the 37 5/8 AtA is for the 97.5 string & 35 cable # 8 module hole 32" draw
 
1 - 4 of 4 Posts
Top