[notrightnow]

I got a new Matrix.

ATA and Brace are a touch long.

The bottom draw stop is touching the cable and top draw stop is about a 1/4 shy.

Is the best thing to remove string and cables to measure and start from scratch using Javi's method or can I start by adding twists to the appropriate cable?

Thanks

Sent from my BlackBerry 8900 using Tapatalk

 

[Cdpkook132]

Sounds like buss is a touch long.

Bring it in to bring the ATA shorter

This will also make the top cam be more synced.

Then put in on the draw board and see where your at. If your close I would just continue on to creep tuning.


Sent from my Verizon iPhone using Tapatalk

 

[notrightnow]

two twists and the draw stop timing is spot on.

ATA a little long but Brace is really close.

 

[Andy.]

two twists and the draw stop timing is spot on.

ATA a little long but Brace is really close.

Max poundage and draw length are the only specs I worry about.


Andy