Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
i have an 03 magna tech that im going to sell. do i need a press to make adjustments to the mods for draw length. i just don't remember anymore. i found the tune charts already. thanks mike
 

·
Registered
Joined
·
47,473 Posts
Nope. There are two bolts in the top and one in the bottom. Remove the bolts, rotate the mods to the right position then replace the bolts. If one bolt is hiding behind a top limb, which is common, you can push or pull the cables to rotate the cam enought to get to the bolt.
 
1 - 3 of 3 Posts
Top