Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
I am going to purchase a Hyperforce. Can someone give me some details on the different cams. I shoot 27" draw length at 60#. What would be the best cam as I think the #2 and #3 can be set for 27".
 

·
Registered
Joined
·
538 Posts
#2 will most likely be a little faster, a little less forgiving. #3 cam will usually be a little slower but a more valley. At least that is how it was with the Z5 and DFX cams of previous years.

Sent from my XT1585 using Tapatalk
 

·
Registered
Joined
·
20 Posts
I am going to purchase a Hyperforce. Can someone give me some details on the different cams. I shoot 27" draw length at 60#. What would be the best cam as I think the #2 and #3 can be set for 27".

I just got my Hyperforce in Edge with the #2 cam a couple days ago and their is a noticeable difference out of the box in shooting it at 28" at 65 lbs. with the #2 versus #3. #2 is faster without a doubt. How fast not sure but it is noticeable. If I had to guess I would guess 5-8 FPS faster. I have always used a #2 cam versus the number #3 on all of my Hoyt's.
 
1 - 3 of 3 Posts
Top