Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,198 Posts
Discussion Starter #1
I've got an 08 hoyt Katera. I need someone to take a picture of the cable route that the control and buss cables make through the cable slide. I had a shop totally screw my bow up and I need a picture to verify what I did is correct. The bow has been acting very odd since the string change and I KNOW the cable routing was incorrect. Someone throw me a bone here please. Season opens up in a week and altho I have a more than competent back up bow in my vtec, I'd like to go with the Katera. Thanks....
 

·
Registered
Joined
·
478 Posts
Not a Hoyt owner, but I'm looking on Hoyt's web site at the zoomed image of the Katera and it looks like the upper yoke cable comes down through the back hole (toward the string) and the lower cable coming from the lower cam through the front hole in the slide (near the riser)

http://www.hoyt.com/compound_bows/hoyt_katera_compound_bow.php
 

·
Registered
Joined
·
3,198 Posts
Discussion Starter #3
1 - 3 of 3 Posts
Top