Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,662 Posts
my experience with Diamond is that you may not know till you tune it, especially with rollers. My marquis with rollers was very close the riser, my black ice is dead center of the trough.
 

·
Registered
Joined
·
24 Posts
Mine is 13/16ths measured from the center of the arrow shaft to the inside of the riser between the berger holes. I paper tuned then walk back tuned to verify it was correct. I shoot easton cobalt 2413's w/220 grn tips cut at 30 inches for spots and easton 3-28's w/ 125 grn tips cut at 26 inches carbon to carbon. Draw length set at 27 1/2, draw weight set at 56 lbs. Shot about 1500 shots so far and no issues. Just a nice shooting bow. Good luck with yours.
 
1 - 6 of 6 Posts
Top