Archery Talk Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
518 Posts
I use them.The only thing I would recomend is to replace the factory nocks with acc-60 bushings and g nocks.I had 2 arrows split at the nock end.The nocks appeared to be pushing into the shafts causing them to split.The nock bushings also protect the ends from impacts.I would also glue the inserts in yourself so you can make sure they are in straight.I used slow setting epoxy so I could spin test the inserts before the glue dries.

CB
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top