Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
How could i check to see if my idler or my cam for that matter, is leaning to a side. how can i solve it if i do.
 

·
Registered
Joined
·
2,846 Posts
On the solo cam bows, I lay a 16" section of a straight carbon arrow shaft along the left side of the idler. I want the right side of the shaft to be 1/8" from the left side of the string at the nocking point. If not, you can twist/untwist the yokes of the cable to get the lean straight.

I don't worry about it with Hoyt bows. The floating yoke (preferred on these bows) lets the top cam find it's happy place:rolleyes:
 
1 - 2 of 2 Posts
Top