Archery Talk Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
738 Posts
Discussion Starter #1
First off im shooting a d340 60# 28.5 draw arrows are Easton n fused 340 spine, @ 27.5 long with 100 grain tip, qad pro hd rest no contact issues. I have been trying to get my bow tuned lately, ok for a while now. I started by paper tuning from 3 to 20 yards got my bow where it was shooting bullet holes, then when i whent to walkback tune, i ended up putting my rest right back where it started off.

Started group tuning at 20 yards good groups about 1 inch. so i just jumped ahead and whent to broadheads. My broadheads were hitting right so i just moved my sight right, untill i was hitting bullseyes out to 60 yards. Now i switched back to field points and they where impacting about 6 inches left. I use slick trick 100 mags . What do i need to do to get them both impacting the same point? Start over and get my field points hitting good then broadhead tune from there or what? Any help thought or opinions would be great, thanks
 

·
Registered
Joined
·
2,025 Posts
Yes. Chase your field tip groups with your broadheads.
If BH hit to the right of FP move rest to the left,
hit left move right,
low move up,
high move down.
 

·
Hunter/Gatherer
Joined
·
13,354 Posts
Yes. Chase your field tip groups with your broadheads.
If BH hit to the right of FP move rest to the left,
hit left move right,
low move up,
high move down.
Yep. Sight in your FPs first.
 
1 - 6 of 6 Posts
Top