[Buck Stopper]

I have a 28.5 draw lenght @ 65lbs my arrow from nock (where string is) to end of shaft is 29.5. I am shooting the Easton Axis ST 340's with a 100gr tip and 3 Blazer vanes, My FOC is about 9.6 not sure if that matters.

 

[Dodgedude]

340's ok?

I think so.

How are your groups?

 

[3DKING]

hey i work at a archery shop and that mite be alittle stiff but that is just fine you whant a stiffer arrow for hunting .:wink:

 

[hoytshtr]

340's will be ok

I used to shoot 340's but I have 30" DL and was shooting 70# so it might be a little stiff just a little
A 400 shaft would be ok also with the shorter DL

 

[Buck Stopper]

I think so.

How are your groups?

Groups are pretty good unless I use wraps then the get a little eratic

 

[Patriot VFT]

I shoot the 340s but you will not need that much spine unless you are drawing between 72-75lbs. I like the penetration of a heavier arrow and you might also. Otherwise, gain a few fps by shooting the 400s

 

[Buck Stopper]

I noticed the arrows I have with wraps don't group as well any opinions?

 

[nuts&bolts]

I noticed the arrows I have with wraps don't group as well any opinions?

Can you tell us what bow,
what year, all the little details?

 

[Buck Stopper]

Its a Mathews Switchback 28.5 draw @ 65lbs

 

[nuts&bolts]

Its a Mathews Switchback 28.5 draw @ 65lbs

You will get better groups
if you try 125 grain field points,
and increase the draw weight by 1-2 lbs.

Do you have the 80% letoff
or the 65% letoff?