Archery Talk Forum banner
1 - 3 of 3 Posts

·
Registered
Obsession Fusion 7 at 56# at 29".
Joined
·
2,738 Posts
Discussion Starter · #1 ·
Is there a determinating factor for the use of broadheads?

For example: If I were deciding between a Slick Trick with a 1 1/8" cutting diameter and a N.A.P. Scorpion with a 1 1/4" cutting diameter. How much K.E. is used and/or required by each broadhead?

The 2 broadheads that I used for a comparison, is just that, a comparison. Any 2 broadheads could be used for an example, but I chose a fixed and a mechanical for a difference in comparison of K.E.

Your opinions and experience is appreciated.
Good hunting, Bowhunter57
 

·
Registered
Joined
·
3,323 Posts
My Opinion...

Is That Either One Will Be Fine If Your Ke Is 55 Or Better...i Will Assume You Mean For Whitetails. I Am Sorry But That Is The Best That I Can Do. I've Been Wondering Just How Far You Have To Go Into The Ground After Going Thru The Deer?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top