Archery Talk Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
1,650 Posts
Discussion Starter · #1 ·
Thanks to good old sellers on AT I have narrowed it down between Easton Fatbo ys and Easton Lightspeeds. I have one question though...will Fatboy 400's cut to 26.5 shoot well out of a 60lb bow at a 27in draw length? The easton shaft selector says that it should be a 500 up to 28 in. long. Will this effect my arrow flight? If not, the I gotta chose between the two. Help!
 

· Registered
Joined
·
2,321 Posts
I can't answer your question, but I shoot the LightSpeed 3D's with my Destroyer and I love em'... There was a differance between the DOA's I was shooting and the LightSpeeds... Call Jerry at SouthShore Archery, he would be more than willing to help you out and does top notch work...
 

· Registered
Joined
·
1,650 Posts
Discussion Starter · #6 ·
I can't answer your question, but I shoot the LightSpeed 3D's with my Destroyer and I love em'... There was a differance between the DOA's I was shooting and the LightSpeeds... Call Jerry at SouthShore Archery, he would be more than willing to help you out and does top notch work...
Thanks for replying....I know both are great arrows, and if the fatboys will not fly as good set up as they are I will most defiantly buy the lightspeeds. This is why I need some help.
 

· Registered
Joined
·
11,527 Posts
arrows

a friend of mine recently switched from a 400 arrow to a 500 lightspeed she shoots 26 in. draw at 55 lbs and she is shooting so much better and we got them to paper tune quite easily never could get the 400 to tune perfect through paper
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top