Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,916 Posts
Discussion Starter #1
when I recieved my k.m it came w/ 27'' mod's #7 top and bottom the stops were on # 4. I read here on this site that u should set limb stops to hit w/about 1/16-1/8'' of space between the cable stops and the control cable. in this position the limb stops are between 4and 3 almost exactly between 3+4. is this correct?My left elbow is acting up(bone spurs) so I have to take two weeks off(doc's orders) after cortizone injection. so i'm going crazy. I can adjust on d board but can't draw it. ..got plenty of time to adjust though. please advise. bob b.
 

·
The Buck Drops Here
Joined
·
5,925 Posts
I would set the stops to right before the cable stops hit.....around 1/16th. Then I would set my limb stops to make sure they contact first.

I believe this is the way most are setting them up to give you max let off.
 

·
Registered
Joined
·
3,751 Posts
On my Sniper, with my limb stops hitting hard into the limbs, my cable stops just barely are touching.
 
1 - 4 of 4 Posts
Top