[natedigity]

I am not sure if this is the right area to put this. I have a kyber shock stabilizer on my bowtech black knight. I was shooting yesterday, and it felt like it was getting loose, so I grabbed it with my hand to give it a twist and it fell off in my hand. The bolt had sheared off inside my riser. Has anyone had trouble with these before? Has anyone had this happen with other stabilizers?

 

[natedigity]

ttt

 

[natedigity]

Bump from page 2 again. Has anyone had a stabilizer bolt break?

 

[nuts&bolts]

Bump from page 2 again. Has anyone had a stabilizer bolt break?

Has not happened to me,
but you might be able to repair it.

You can get a 5/16-24 threaded stud
from www.mcmastercarr.com

 

[meanv2]

Yep, I've seen this before. The harder shooting bows for the most part produce more shock and vibes. That is hard on acces. attached to the bow. I have seen all kinds of things break and shear off as a result

 

[natedigity]

so can the bolt that is secured in the stabilizer be removed and replaced? I have been happy with this product up until now. Do you think there is an easier way to remove the left over portion of the bolt in my riser then drilling a hole in it and using an easy out?

 

[nuts&bolts]

so can the bolt that is secured in the stabilizer be removed and replaced? I have been happy with this product up until now. Do you think there is an easier way to remove the left over portion of the bolt in my riser then drilling a hole in it and using an easy out?

Take a punch,
and make a "dent" in the remaining piece of stud.
Then, yes, drill a hole and use an easy out.

 

[natedigity]

Well I was able to remove the mounting bolt from both my riser and the stabilizer. Kyber systems emailed me back and they are shipping me a new mounting bolt today. I will be back in business in no time. I hope that was a freak thing that happened. Thanks for your responses.