[COArrow]

Any idea how many lbs per turn and how far back you can go? Thanks.

 

[JP61]

Not sure on turns, but never more than 10# below peak weight.

 

[COArrow]

Thanks, more interested in how many lbs per turn.

 

[brdymakr]

About 3# per turn...3 turns max...Hope this helps some and it's not exact.

 

[COArrow]

Thanks, that is what I needed. The bow maxed at 61.5, but is currently at 57.5. With the limbs backed off there is quite a bit of vibration compared to maxed out. Wanted to know how much each turn increased as I work back up to maxed out. Thanks.

 

[Pasinthrough]

Thanks, that is what I needed. The bow maxed at 61.5, but is currently at 57.5. With the limbs backed off there is quite a bit of vibration compared to maxed out. Wanted to know how much each turn increased as I work back up to maxed out. Thanks.

Did you reset the string stop when you took the limb bolts out a turn? I've had to do that to every bow I adjust down using the limb bolts. It makes a difference imo.

 

[COArrow]

Did you reset the string stop when you took the limb bolts out a turn? I've had to do that to every bow I adjust down using the limb bolts. It makes a difference imo.

I noticed that last night, that there was about 1/4 inch gap. That was actually the next thing I was going to try Appreciate the insight, that just might do it.