Archery Talk Forum banner

1 - 3 of 3 Posts

·
C:\My Documents\My Pictur
Joined
·
23,094 Posts
Discussion Starter #1
Hello All
? How far in inches, do you pull your Crossbow, bow string. Till the cams breaks over, for a lighter pull.
? And at what poundage dose it break over.

Reason I asked. I put my PSE front end using no stock . And pulled it with a 350 scale, attached to a 400 pound Actuator, with a 18 inch stroke and a turn buckle. Just trying to compare with others. Thanks [ Later
 

·
C:\My Documents\My Pictur
Joined
·
23,094 Posts
Discussion Starter #2
Come on guys. Teach this New B somthing, or do I have BO down here in the crossbow land. ha ha :wink: [ Later
 

·
C:\My Documents\My Pictur
Joined
·
23,094 Posts
Discussion Starter #3
Hello All
Well I got my answer. By putting the crossbow front on my 12 foot bow press track. And using a weight scale and a actuator to pull the crossbow bow string. Sorta worked like a horizontal draw board.:wink:

Marked my crossbow bow string position down on the track. And added another mark for the length I had established from crossbow bow string at rest. To the trigger lock. And that being 15 1/4 inches.
Then when I pulled .I found the peak weight and the weight at 15 1/4 inches . Will try to get a pic up of the procedure I used. [ Later
 
1 - 3 of 3 Posts
Top