[Mike83350]

This is my girlfriend's bow. The cable is running the limb, hopefully it makes sense in the picture.
How would I fix that?

 

[Mike83350]

Here's the pictures

 

[skynight]

Looks like they put the cam spacers on the outside of your limbs instead of between the cam and limb.

 

[fatboy111]

Check your yokes and cam lean. The spacer on the outside of the limb was used to stop the vibration of the axle clip.

 

[laserbeam1001]

Put the spacer that is between the limb and the e-clip between the cam and the limb. FYI you will need a press to take off the strings and relax the limbs before you can remove the axel and move the spacer

Sent from my ONEPLUS A5010 using Tapatalk

 

[Mike83350]

This makes sense thank you. I will do this.

Looks like they put the cam spacers on the outside of your limbs instead of between the cam and limb.

 

[fatboy111]

The spacer may not fit between the limbs. If you move it, the cable may not track properly. Keep an eye on that and the yoke legs.

 

[kballer1]

^ has no clue, that spacer will fit between the cam & limb if it now fits on the outside of the limb & E-clip.Look at the pic & where do you see a yoke?

 

[leoncrandall74]

Looks like they put the cam spacers on the outside of your limbs instead of between the cam and limb.

^^This^^

Sent from my SM-S920L using Tapatalk