Archery Talk Forum banner

loose arrow knock

537 Views 15 Replies 7 Participants Last post by  kokoe
I was shooting and 2 arrows went astray and hit the wall, they went astray because the string pulled the knock out of the shaft. these are carbon shafts so the knocks are press in, could I glue them in what should I use, hot melt or super glue. on one arrow the point insert pulled out as well are they normally glued in or pushed in dry. I never built a carbon shat before they are new to me thanks Mike
1 - 1 of 16 Posts
Are they the cheap carbon shafts often sold with the cheaper bows? If so they're always loose and the inserts aren't glued in well either. As above, some plastic to shim will get you by. But invest in some good quality arrows. They give less issues and are well worth the investment.
1 - 1 of 16 Posts