Archery Talk Forum banner

loose arrow knock

538 Views 15 Replies 7 Participants Last post by  kokoe
I was shooting and 2 arrows went astray and hit the wall, they went astray because the string pulled the knock out of the shaft. these are carbon shafts so the knocks are press in, could I glue them in what should I use, hot melt or super glue. on one arrow the point insert pulled out as well are they normally glued in or pushed in dry. I never built a carbon shat before they are new to me thanks Mike
1 - 1 of 16 Posts
The string pulled the nock out? Just how tight are the nocks on the string? Try this, nock an arrow with the string pointed at the floor. The arrow should hang, then hit the string, the arrow should fall to the floor. If it doesn’t your nocks are to tight on the string.
  • Like
Reactions: 2
1 - 1 of 16 Posts