Archery Talk Forum banner

loose arrow knock

540 Views 15 Replies 7 Participants Last post by  kokoe
I was shooting and 2 arrows went astray and hit the wall, they went astray because the string pulled the knock out of the shaft. these are carbon shafts so the knocks are press in, could I glue them in what should I use, hot melt or super glue. on one arrow the point insert pulled out as well are they normally glued in or pushed in dry. I never built a carbon shat before they are new to me thanks Mike
1 - 1 of 16 Posts
What Jtrops said but the point insert should be epoxied in or glued in
wondering if the nocks are proper for your shafts most quality nocks and shafts today don’t have a loose fit
1 - 1 of 16 Posts