Archery Talk Forum banner

LX Cam Change

345 Views 9 Replies 5 Participants Last post by  Thorner3
So I have an old LX that I bought used a few years ago. I never had it fitted to me but I now know the 29" draw is much too short for me. I was going to look into buying a new cam to give me closer to a 30-31" draw but I'm not sure how to tell which ones will actually work for this. This is my first time looking into modifying a bow and I plan on having a shop do it but I'd rather not buy the wrong thing and delay getting everything set up. I've shot the bow fine with the shorter draw but I always had to adjust myself a bit to make it work. I think it's time I start shooting properly.
1 - 10 of 10 Posts

· Registered
Joined
·
15,916 Posts
So I have an old LX that I bought used a few years ago. I never had it fitted to me but I now know the 29" draw is much too short for me. I was going to look into buying a new cam to give me closer to a 30-31" draw but I'm not sure how to tell which ones will actually work for this. This is my first time looking into modifying a bow and I plan on having a shop do it but I'd rather not buy the wrong thing and delay getting everything set up. I've shot the bow fine with the shorter draw but I always had to adjust myself a bit to make it work. I think it's time I start shooting properly.
A 30" cam will measure 30.5"

Sent from my SM-G532M using Tapatalk
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top