Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
:rolleyes: Is the tiller on my lx supposed to be the same on both limbs? right now i have the top limb turned out a couple turns.When my bow is turned up all the way there off.
 

·
Registered
Joined
·
1,157 Posts
The tiller will be different-general rule is to bottom the limb bolts and back them off an even # of turns if necessary to lower the poundage. To correctly measure tiller run a string between the axles and measure to that string. Hope this helps.
 

·
Registered
Joined
·
662 Posts
if you are talking a mathews lx per mathews tighten lomb bolts all the way in and back out both the same turns and you are good . It has always worked for me
 
1 - 4 of 4 Posts
Top