Archery Talk Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
The cam bearings in my 03 Martin Jaguar Magnum have gone bad. I called Martin hoping to order a new dyna-cam to fix my bow and was told by one of their representatives that all of their parts for their older bows were destroyed in the fire they had recently.

I am hoping to find a third party dealer or individual who has a dyna-cam available. Does anyone know of any places that readily stock the martin dyna-cam?
 

· Premium Member
Joined
·
10,938 Posts
If it's just the bearings that went bad you should be able to find replacements from some bearing manufacturer such as Caaman Bearings. Might be a bit trichy doing it as they are pressed in, but a decent machine shop should be able to do it for you. You DO NOT necessarily have to get the bearings from Martin. They buy them from somebody. Maybe a phone call to them and they can give you the manufacturer and part number.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top