Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
8,652 Posts
Discussion Starter #1
What is the axle to axle and brace height on the P3 Elite? What are the limb choices on max draw weight? What draw lengths are offered with the Nitrous X cams?
Thanks,
Jbird
 

·
Registered
Joined
·
4,405 Posts
lengths...

Now don't quote me....even tho you should be able to..;)

ata 38" and brace at 7 3/4...now this depends on the Base cam size as it will vary a little...

draw lenths from 25 to 33 I think...again depending on Base size....

PUG

OH yeah....Draw weights from 50 to 70#....in 5 pound increments..
 

·
Registered
Joined
·
8,652 Posts
Discussion Starter #3
Thanks Pug

The person I am asking for would have a 26"-26.5" AMO draw length so I would guess he would be on the Nitrous A cam.
Jbird
 

·
Registered
Joined
·
4,405 Posts
Yep...

Definitely in the A cam...the A cam maxes at 28 or 28.5, so they may be able to get into a mini mod, which would give the shooter a little more speed....and in all honesty we could probably get the weight down to as low as 35# or so with the A cam...I beleive that is what my wifes bow was set at...

PUG
 
1 - 4 of 4 Posts
Top