Archery Talk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter #1
For anyone who wants to tinker and put together an S4 or franken bow this ad is for you.

I have the following S4 parts that I would like to get rid of all at once.

-S4 chrome riser
-Pair of 4H limbs (40lbs I believe)
-Pair of Furious XL cams
-Pair of Furious small cams (unmarked but they are small)
-Pair of Furious M mods that have the webbing chewed up
-Pair of Furious L mods
-Pair of Furious S mods
-Pair of Furious M mods
-Pair of long axles (2 sets)
-A collection of bushing, spacers, ect
-One set of ranger string for the small cam/M mods
-hand sling in green/purple color
-Trophy taker rest, single hole

Riser has the typical wear everywhere you would expect it but otherwise is bright and shiny. I checked the riser on a pane of glass and it is straight and true. The limbs are fine with no cracks or obvious defects.

The small cam and M mod that is on the bow right now is not going to work. The webbing on the mods are chewed out and cause each side of the mod to be out of sync. That said the small cam is good, just the mods bad. All other cams and mods listed are 100% never used still in the plastic.

150$ TYD
 

·
Registered
Joined
·
187 Posts
Discussion Starter #4
I will post pictures tonight. For those that have PMed me with questions or requests for pictures I will respond individually and make a post tonight with pictures. For those that PMed me with an offer lower than my asking price I will consider and accept in order of highest offer / first offer.

Sorry about the late reply, I thought I had email notifications enabled. Should be much faster responses now.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top