[Sappo]

:tongue:

 

[xswanted]

Wow I shoot almost the same exact set up!

Looks like you need a big JONson stab for the front of that thing.

Not much to worry about when it comes to tuning this bow.

As long as the timing dot is where its supposed to be you should be good to go!

 

[Sappo]

Wow I shoot almost the same exact set up!

Looks like you need a big JONson stab for the front of that thing.

Not much to worry about when it comes to tuning this bow.

As long as the timing dot is where its supposed to be you should be good to go!

Oh yeah I almost for got Easton ace 35" stab with 2 10" side stabs

 

[Kale]

Sweet shooting bow!

i have pretty much the same setup as well,

will be for sale soon though..shooting for diamond this year..

 

[Sappo]

Sweet shooting bow!

i have pretty much the same setup as well,

will be for sale soon though..shooting for diamond this year..

I thought I was gonna have my bow on monday but know I see you have it!!! Give it back and how did you get it?:wink:

 

[riley1131]

I thought I was gonna have my bow on monday but know I see you have it!!! Give it back and how did you get it?:wink:

Sweet rig.

 

[Boone]

Go on to Mathews home page and in the forums section they have a tech section that shows how to tune them.

 

[Limey]

Best tip for all Mahtews bow is make sure the bow is in spec and the cam is properly rotated:darkbeer:

 

[Pete731]

Cam is in good position.

http://pgremeaux.com/wordpress/wp-c...rence-des-cames-mathews/3_Apex7Rotation_1.jpg

Nock set at 1/4" may be 3/8" for those big 2612. Use a D-loop with under the arrow nock set to give more downward pressure on the rest.

http://pgremeaux.com/wordpress/wp-content/gallery/dloop/dlopp6.jpg

3/4" center shot from window to center of the shaft.

http://pgremeaux.com/wordpress/wp-content/uploads/2007/11/image001.jpg

Make sure your idler wheel is align, which should be the case from factory.

Paper tune and you will be good to go!

Good luck!