Archery Talk Forum banner
1 - 5 of 5 Posts

·
Banned
Joined
·
6,017 Posts
Discussion Starter · #1 ·
it has been along time since i set a bow up..my cousin purchased a Q2..60-70lb draw range...anyway i set the bow up and we soon discovered he had the wrong cam (28in) he needed a 29..so he ran down to our local shop and picked up a 29in cam got it on and all is well...my question...is the Q2 capable of 80% let off???it feels like 65% he has it at 63 lbs and it is still pulling at him...I noticed that there are no adjustments on the cam for let off or modules so i wounder if there is a different cam to purchase?????????

Thanks
Mikieday
 

·
Registered
Joined
·
352 Posts
The draw weight won't affect the letoff at all. If the bow doesn't seem right, make sure the string and cable lengths are to spec and that the cam is in proper rotation. The little tuning marks on the cam should run parallel with the bowstring. A shop will need to make the adjustment for you if you don't have a bowpress.

Gipper
:)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top