I have the web style and love it. On and off very easy. The 4 arrow is what i got. The insert is holding up just fine, it's got provisions for broadhead blades or field points.

 

I tried both the web 4 and q lite two piece styles and prefer the web, even though I keep it on my bow when shooting. It's almost the same form factor as the two piece and weight just about an ounce more. Also for whatever reason the two piece made some noise when I would draw with arrows loaded, maybe as the rubber shifted when the riser flexed. The foam on the web is very durable from my experience the past couple years using mechanicals.

 

Anyone run the Web with a back stab on the other side? Does it provide a good balance?

 

I have a web 6 arrow on my atlas. Every Mathews I’ve ever owned I put a web on. The quality of the quiver is great. I love the way it detaches. Very sold. Quiet. Foam last a LONG time. They also have replacement foam inserts for them.

 

I was thinking of running a 6 arrow web quiver and run a back bar. Any recommendations on the mounts for the back bar? I know Mathews makes a cheap offset mount for like 25.00 but that just puts the bar straight back, no angle to it

 

Is the web quiver adjustable in terms of being able to slide up or down the length of the bow to ensure your nocks don’t hit the ground when you lean it on a tree, deer etc?

 

I don’t believe it is. But it mounts pretty high on the bow so there should be plenty of clearance

 

I’ll go counter to most. I prefer the two piece. Bought a new one off eBay for I believe $75 a few months ago. It’s the older five arrow model. It’s black to match the riser color on my Atlas.

 

I tried the web style and didn't care for it. Way to short for 30" arrows. Made a lot of noise. Bought the 2 piece q-lite and haven't looked back. So solid and the arrows are held firmly/quietly in place.

 

Do you know if the Web quiver need a special adapter for the GeoGrid? I got a Creed and it doesnt seem like the stock mounting on the quivers would work on it.

 

Yes they are like 20 bucks on eBay

 

Yes, you need the correct mounting blocks for geogrid models. I'll send you a PM.

 

I have the 4 arrow quiver, it’s the best way to go. They accent the bows so well and they’re easy on and off

 

I’ve heard great things about tight spot too but have never owned one. I went with the Q Lite for my v3 and love it. Holds firm and dead quiet. The only thing I don’t like is that it’s more difficult to remove if you need to pack it all up for travel.

 

I have the web style 6 arrow and it works great for me. I attached a loop of paracord to the top of it and take it off my bow and hang it from my gear strap once I'm up in a tree. No issues with the foam so far after running both mechs and fixed blades in it

 

I like my Mathews quiver foam holds up okay. I use rage broad heads they stay in tight

 

I love my Q lites. Price is ridiculous but they sure are nice

 

Mathews back bar adapter(150€) is made by shrewd, same part without mathews logos about 110€.....😏

 

I'm not a big fan of Mathews quivers on my V3 31 when go to take the quiver on or off the bracket, the bracket pivots just a bit until it catches the mount pocket. Seems there should be a better way?

 

Even though I'm not a hoyt fan their system with quiver is good. Simple propeller nut, quick on and off, light. Loop on top so can hang on a tree. made by fuse? 🤔

 

I have a Q-lite on my V3 31 and I like it a lot! Quiet, no vibration and lighter than the removable options. But I did just purchase a Tight spot to try out. I've heard a lot of good things about them. They are making a few colors matching the major bow brands also.