Archery Talk Forum banner
1 - 2 of 2 Posts

·
Miller Time
Joined
·
3,022 Posts
When my Landslyde came in, I had already read this thread Landslyde noisy?
So I checked every single bolt, set screw and buffer piece. About half of them were hand tight at best. After setting the axis and tightening evening down there was still a slight vibe after the shot. I narrowed it down to the little set screws that clamp the buffers to the adjustment rails. It’s a fine line between loose and so tight that it won’t move. Just have to play with it a bit to get it right. And before anyone says that you shouldn’t have to do any of this when you pay $400 plus for a sight I completely agree! I like to know how things work in the case of failure so wasn’t as much of a big deal, but understand the frustration.


Sent from my iPhone using Tapatalk
 

·
Miller Time
Joined
·
3,022 Posts
I internally debated posting this but maybe someone will have a solution.
With a standard Axcel scope and barrel the vibe was noticeably less than with a UV3 and barrel. The UV almost seems to amplify the resignation.


Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
Top