Archery Talk Forum banner

Maxima 250 or 350 for my Guardian?

343 Views 5 Replies 6 Participants Last post by  neednew1
Planning on shooting CX Maximas through my Guardian but not sure what size to go with? Draw is 29" and will be hunting / 3D at 63#-65#. I'll be shooting a 100 gr. Rage mechanical. Thanks in advance.
1 - 6 of 6 Posts

· Registered
Joined
·
4,074 Posts
Planning on shooting CX Maximas through my Guardian but not sure what size to go with? Draw is 29" and will be hunting / 3D at 63#-65#. I'll be shooting a 100 gr. Rage mechanical. Thanks in advance.
250 is on top....350 is on bottom.... for hunting I would opt for the 350.
 

· Registered
Joined
·
714 Posts
i use to hunt with 350's,,,decided to try the 250 for a little flatter shooting,and more speed,,,GO WITH THE 250'S!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
you be glad you did,i still always get pass throughs just fine,my pins have tightned up,and im shooting over 300 fps with 28" draw and 68 lbs.
 

· Registered
Joined
·
2,847 Posts
I am shooting the 250's in my 62 lb./29" Katera - but had to go with a 27" shaft and a 75 grain point to get rid of the weak spine reaction. I think in a bow with a lower IBO rating and greater brace height, you might be able to get by with a little longer arrow and/or a 100 grain point.
 

· Shooter of many brands.
Joined
·
7,174 Posts
Spine

I had same draw and wanted to shoot 60-65#. I played around a little and this was I thought after shooting both with 100 grain points.
250's -62# and below.
350's -63# and up.
I don't know if it matters or not, but I was shooting Blazers and wraps on both. Bow was a twin cam. (Katera)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top