Joined
·
985 Posts
Same deal, just different arrows this time. These really are brand new, except for the cutting. I never even glued the tips in. I cut 3 off to 27 13/16" shaft length to start tuning, but my dad said he'd rather shoot the x-10s I used to have for sale instead of these. No pins or nocks included, but I do have 11 80 grain (I just misplace stuff, just like that twelfth x-10 shaft) stainless steel breakoff tips included.
The three I cut are 27 13/16" or 706mm
The nine stock ones are 29 7/8" or 759mm
I really want to trade for x-10 500s.
Since they are actually new, and tips are included, but three are cut, I think 270 tyd is reasonable, since they are 260 from Lancaster and the tips are 30.
I'll put pics up soon.
The three I cut are 27 13/16" or 706mm
The nine stock ones are 29 7/8" or 759mm
I really want to trade for x-10 500s.
Since they are actually new, and tips are included, but three are cut, I think 270 tyd is reasonable, since they are 260 from Lancaster and the tips are 30.
I'll put pics up soon.
