Archery Talk Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
658 Posts
Discussion Starter · #1 ·
Hello there,

I recently bought a Merlin SuperNova .
I was wondering if it is a problem to use a Bowmaster bow press on this bow?
thanks for advice.

Hans.
 

·
Registered
Joined
·
487 Posts
I was wondering if it is a problem to use a Bowmaster bow press on this bow
Your warrantee :confused: Merlin stipulate only an Apple type bowpress should be used.

I'm sure pinwheel12 will be able to give more advice pertaining to the American market.

Cheers
 

·
Registered
Joined
·
487 Posts
I'm sure pinwheel12 will be able to give more advice pertaining to the American market.
sorry..please disregard the reference to the American market...I just noticed your address....

and to date, I don't think they have your country yet:D :D

cheers
 

·
Registered
Joined
·
5,307 Posts
It should not be a problem. Just make sure you use the leather between the limbs and the cable of the Bowmaster so you don't mare the paint. This type of press is a very safe type for bows as it does not stress the riser and only brings the limbs in from the ends the amount needed to do whatever you need to do.
 

·
Registered
Joined
·
5,101 Posts
I have used a bowmaster on alot of different bows and have had very good luck with it. I read a post awhile back by someone who had one. The first thing he did was take off the tightening handle and put a socket on it and use a cordless drill to tighten and loosen it. Haven't tried it yet but it sounds like a very good idea.
 
1 - 5 of 5 Posts
Top