Archery Talk Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter · #1 ·
Hello what is the shortest bolt I can shoot out of the micro 335 I'd like to get a 14" bolt to shoot out of it. And also has anyone shot any 2219 or 2216 aluminum bolt out of them. Thank you in advance.
 

·
Crossbow Nut
Joined
·
715 Posts
If you are talking shaft length, and not total arrow length, then yes, you can shoot a 14" arrow out of a Micro 335. I shoot 2219 XX75 exclusively out of my Micros. I cut the shafts to 15" and get 2 out of a full-length shaft. No problems with accuracy at all. I could shoot shorter arrows, buy my state says 14" minimum overall length.
Jack ><>
 

·
Crossbow Nut
Joined
·
715 Posts
I should clarify; cutting a 15" shaft, adding an aluminum flat nock and Spitfire XXX makes my arrow just under 17" OAL. This puts my broadhead right where I want it for safety- right about in the center of the stirrup.
 

·
Registered
Joined
·
2,737 Posts
short arrows for the 335 sounds like a good idea until you have to pull them out of the target with their vanes buried....
norm
 
1 - 7 of 7 Posts
Top