Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
314 Posts
Discussion Starter #1
i just bought a ten point pro view scope that i am going to be mounting on a barnett revolution. does anybody have any pointers. i am hoping that the rings on the x bow will work with the ten point. it has a barnett scope on it now.
 

·
Registered
Joined
·
3,019 Posts
The PRoView will come with 7/8 scope rings and most Barnett's are 3/8 scope rails. You will most likely need a new set of rings to go on the scope.. Other then that it should go on fine.
Randy
 

·
Registered
Joined
·
314 Posts
Discussion Starter #3
i was wondering if the diameter of the two scopes are the same. i have a barnett scope on it and it seems to be 1 inch in diameter. i should have the scope in a day or two. kk1340
 
1 - 3 of 3 Posts
Top