Archery Talk Forum banner

Moved Rest

445 7
I had to move my rest up because I didnt have anymore adjustment on my sight. When i got my bow it was tuned or so I was told. Anyay my question is since I mived my rest and got broad heads and fiels points to hit the same should I just leave it alone or do i need to paper tune? I think the arrow flys alittle funny but it may just be the way I see my vanes. All the arrows hit the target straight, they are not going in at an angle. Thanks
1 - 8 of 8 Posts

· Registered
Joined
·
138 Posts
i would paper tune it, just to be sure. because you moved it up, and it was tuned before, so it should be off.
 

· Registered
Joined
·
55,407 Posts
Ok first off moving the rest because the sights are off is the wrong thing to do. If you use a peep sight that is what should have been adjusted, if you don't then your anchor point has changed and needs to be adjusted. Set the rest back, paper tune, make sure the arrow your shooting is the correct arrow for your set up.:)
 

· Registered
Joined
·
2,109 Posts
I would say if your broadheads and field points are hitting the same spot to leave it alone. To me that is the final tuning I do to my bow after paper tuning and walkback tuning. How far are you shooting? If you're only shooting 20 or 30 yards I would step back to 40 or 50 and double check things. If your two groups are still in the same spot, then you are pretty well tuned, I would think. Just adjust your sights from that point.
 

· Registered
Joined
·
38 Posts
Discussion Starter · #8 ·
Ive shot at 20, 30, and 40. everything is groupign pretty good, whats not i would be is operator error. I didnt thikn i wold have to paper tune again since I would just have to adjust everything to get eh broad heads to hit with field points. It would kind of be startign the process over again.

Thanks for the help guys
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top