Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
687 Posts
Discussion Starter #1
Can anyone help me by posting a picture of where my cam should be on my MQ1? It is out of rotation and I can't find any reference pictures to go by.Mathews does not have the MQ1 on their web sight anymore.Thanks in advance for your help,Louie.
 

·
Registered
Joined
·
349 Posts
I don't have a picture, but it's pretty easy to fix. If you look on your cam their are two tiny holes about the size of a pinhead. Looking at the front of the cam, one is on the left side of the limb and one is on the right side, roughly about 3 or 4 inches apart. You'll notice these holes run parallel with your main string. They "should be" parallel to the string. If not, twist your string or cable as necessary to get the two holes in line with the string. This is the proper tuning position for the cam.
 

·
Registered
Joined
·
1,694 Posts
Hope this helps. Be safe.
Shoot Straight
Derbytown :D
 
1 - 4 of 4 Posts
Top