Archery Talk Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7,577 Posts
Discussion Starter #1
I been reading about how some of the mr bows are not making speed so I started adjusting the cams. I have now got the bow shooting 275fps at 69.4 lbs and at a measured 26.375 draw with a loop. Arrow is 455gn. This should get me close to a 354 ibo. This sounds great but my timing is way off. Bottom cam is hitting first and not just a little but a lot. But if I get the cams close together it slows down. What I'm I doing wrong. Thanks for any info
 

·
Registered
Joined
·
7,577 Posts
Discussion Starter #2
Update I now have the cams hitting together now I'm pilling 70.4 and now have 276 fps not much of a change getting cams timed. The only difference is the cams have a better wall now. I guess this is about all I'm going to get. Not complaining to much it is about 10 fps faster then my d350 with the same arrow. My hunting arrow is going to be around 470 gns. Should be a hard hitting arrow for my short draw lenth
 
1 - 2 of 2 Posts
Top