Archery Talk Forum banner

Need to locate someone to repair limbs

290 Views 1 Reply 2 Participants Last post by  Jbird
I have an older Hoyt with Carbon Plus 4 split limbs I somehow bent the lower axle and didn't catch it before it had wollered out one of the axle holes is it possible to have the axle holes sleeved or sometype bushing installed to assure true alignment of axles to limbs
1 - 2 of 2 Posts

· Registered
Joined
·
8,652 Posts
Hole Fix

You can fill the holes with JB Weld and redrill them. You will need to do this with a drill press or in a jig to make sure the holes are drilled plumb. Check out the Spothogg news letters on their site. They have done this a bunch to fix bows that the holes were not drilled perfect at the factory.
Jbird
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top