Archery Talk Forum banner

Status
Not open for further replies.
1 - 20 of 76 Posts

·
Registered
Joined
·
28,450 Posts
Discussion Starter · #1 ·
Ready to ship IMMEDIATELY!!

DOES THE VIBRATION FROM YOUR ULTRA STIFF STABILIZER TRANSFER TO YOUR SIGHT BAR, REST, LIMB BOLTS, HAND, SHOULDER OR ELBOW? Do you want more vibration dampening without the movement of rubber and steel weights on the end of your long stabilizer? WE HAVE THE ANSWERS! … Shock Collar and/or Mini-Silencers. As an option for any 5/8” to 1¼” diameter Carbon or Aluminum rod, the “Mini-Silencer” pictured above had a retail price of $50.00. We are now offering it at a Special AT price of $25.00. This 2-piece aluminum unit is 1½” diameter and 2” long and unscrews in the middle. It is ULTRA-LIGHT and ADJUSTABLE at 1.4 oz. to 4.4 oz., depending on how many of the 6 WEIGHT BALLS (1/3 oz. each) you install in the furnished Jel-lubber™ module. Jel-lubber is a Jello®-like elastomer with phenomenal vibration and shock-absorbing ability. When the shot goes off, the vibration goes into the weight balls, which try to move. The movement is smothered by the Jel-lubber before it can be transferred to the aluminum case, down the rod and into your hand, sight, rest, etc. The softer the elastomer, the more vibration is dampened. This type of Jel does not have enough tear-strength to mold into external dampeners, therefore our patented application keeps the Jel intact and protected and allows the weight balls to absorb and Jel to kill vibration without the housing flexing or contorting during the shot process. The result is an ultra-soft shot without undue movement at the tip of your stabilizer. The Mini-Silencer is drilled and tapped on both ends to accept any stabilizer with 5/16” X 24 thread. One end tapers to 1” and will mate with ¾” or larger tube stabilizers. The opposite end tapers and is countersunk to accept a 5/8” diameter rod or a Screw-In Bow Jax or 5/8” stack weights. The 1” diameter side can be used on top of most stack weights on most stabilizers (see picture above). Mini-Silencer can be adjusted for any application. For example: the total weight is 4 oz. with 5 balls installed, and 3 oz. with 2 balls installed. This can be used as a substitute for 2, 3 or 4 oz. stack weights that shooter’s typically use on the end of their stabilizers.
Includes Jel-lubber™ module and 6 weight balls. Available in black or silver.

Screw-in BowJax (.6 oz.) pictured below (not included) is an additional $5.00.

Mini Silencer




Our second solution is the Shock Collar.

“SHOCK COLLAR” New from Bernie’s Control Freak Steadilizers. Ready to ship IMMEDIATELY!!
This NEW low profile vibration dampener is made of ultra-soft rubber… weighs less than 1 ounce. Only 2½” long, 1 5/8” diameter … only 3/8” thick. It is made especially for the larger diameter aluminum or carbon stabilizers: ¾” to 1¼” in diameter. (X-Rods, B-Stingers, Doinkers, Posten’s, etc.) Unlike others on the market, it takes out the shock but doesn’t catch the wind — at a very economical price. Great for bowhunters and target shooters alike. This pliable elastomer will stretch over large diameter stabilizers like an elastic collar. The raised ridges trap the shock and vibration over its entire length. Can also be separated into two 1¼” units so they can be placed at different points on the rod for maximum vibration dampening, without adding unwanted weight to the stabilizer itself. Can be used in conjunction with the Mini-Silencer for extra dampening. Retail $14.00 AT Special $12 Staff Shooter price $10.00


Shock Collar



Shock Collar (2 part)



In real life... (new pic)

 

·
Registered
Joined
·
14,506 Posts
HEY that looks like big piece of licorice LOL
 
1 - 20 of 76 Posts
Status
Not open for further replies.
Top