[WhiskeyTango99]

The I5 has been a breeze to tune.

Sent from my LM-V600 using Tapatalk

 

[WhiskeyTango99]

Honestly it was a easy as

Check timing on cams.
Set center shot

Done.

I did have to go through and replace the shims but that was because I have torn left slightly with every prime I have owned back to the (back from the impact days) so I started by having it shimmed to the left and when my first shot came out tail right i put it back to neutral and was done.

Bow setup is
82#
29" draw (on the cam) but with combination of felt and shrink wrap i beefed up the holding weight and it is around 28.75
RIP TKO 300 with their 63 gr ss insert and a 125 head


Will also add that I have the VT gen7x rest and waiting to play with the new Hamskea but both are limb driven. Just seemed to always have better luck with the ability to adjust launcher tension over a cable driven rest.





Sent from my LM-V600 using Tapatalk

 

[WhiskeyTango99]

Curious - when you say a breeze to tune, what details could you share? I got my inline 3 and I can get it to bare shaft bullet hole but I have to move the rest a bit out of center shot. Started out with that trademark prime nock right tear


Sent from my iPhone using Tapatalk

^^^ pm me if you wanna discuss or you need some help in tuning.

Sent from my LM-V600 using Tapatalk