Archery Talk Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
422 Posts
Discussion Starter #1
I installed a new vapor trail string and cable on my Ross and I have a question regarding the idler wheel lean. I have been told and read to different things so I am curious which to go with. I've read and heard to put an arrow down the side of the wheel. After that I have heard that the arrow should run parallel to the string and I have also hear it should point to the center of the string. Just curious which method is correct. This is my first string and cable replacement on my own and as of right now it is set the way it was when the old string and cable were on it which is the arrow in pointing to the center of the string if it is held on the left side (opposite side of the cable guard) of the idler wheel.

Thank you in advance
 
1 - 1 of 1 Posts
Top