Archery Talk Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,044 Posts
Discussion Starter #1
Friend bought a used octane stab for his son and wants to change the inner red color tube with green sticker material and was wondering if anyone took one apart and is it a hassle to remove the tube and reassemble? Thanks..
 

·
Full Throttle Baby
Joined
·
2,689 Posts
Mine came apart really hard. The holes drilled in the side of the collars will take a 1/4 inch round pin and you should be able to unscrew the ends. I bent two 1/4 inch drill bits trying to remove mine. I ended up using 2 wrenches to take mine apart which marked the finish. This was not a problem for me because I was changing the color of the ends to match the bronze on my Air Raid.
 

·
Registered
Joined
·
3,044 Posts
Discussion Starter #3
Mine came apart really hard. The holes drilled in the side of the collars will take a 1/4 inch round pin and you should be able to unscrew the ends. I bent two 1/4 inch drill bits trying to remove mine. I ended up using 2 wrenches to take mine apart which marked the finish. This was not a problem for me because I was changing the color of the ends to match the bronze on my Air Raid.
Thanks...:darkbeer:
 
1 - 3 of 3 Posts
Top