Archery Talk Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I am getting a top cam noise on my Outback when I draw the bow back and let the draw back down. It sounds like a noise a rubberband or a string insturment makes when you pluck it. It only makes the noise when I let the string down!:rolleyes: Any suggestions?? Bow is set at 28" draw length and 65lbs, string is newer 300-400 shots.
 

·
Registered
Joined
·
209 Posts
idler noise

the two plastic yoke holders need a little grease on them. I had this problem on my lx.
 

·
Registered
Joined
·
35 Posts
Discussion Starter #3
grease

what type of grease do you use? Something that doesn't smell...
 

·
Registered
Joined
·
2,289 Posts
pull the bushing off..

Pull the plastic bushing off, (what the split cable go on) and scuff them on some emery cloth, my switchback was making the same noise and I got some teflon washer like from mathews to put under the bushings, try scuffing and if this quiets it get the washers from a mathews dealer...
 
1 - 5 of 5 Posts
Top