Archery Talk Forum banner

1 - 2 of 2 Posts

607 Posts
Not nock travel...Cam Timing (if dual Cam)

how do I set up for peak knock travel, or how do I find the sweet spot.
The actual nock travel is a primary function of the cam design and to a much lesser degree the individual limbs (are they matched) not much you can do to alter what the bow design produces.
If its a dual cam bow a draw board would be vey helpfull to time cams, if you also have a digital force gage you will be able to really get those cams dead nuts.
Lots of ideas for draw boards on the forum plus some ideas for cam timing without one.
Just do some searches, you will be amazed.
1 - 2 of 2 Posts