Archery Talk Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,703 Posts
Discussion Starter #1
new strings from kinseys 07 allegiance straight at 1st. now it has turned 1/8 to the left "r.h. bow" built myself a press. question is do I cut the serving resplit the string and tie it in or do i remove it from the cam and twist it ?:eek:
 

·
No Hype, Just Hunt
Joined
·
12,419 Posts
I would just twist the d loop a little to off set that 1/8". If that doesn't solve it add a twist to the string. There is no need to retie the peep.
 

·
Registered
Joined
·
2,703 Posts
Discussion Starter #3
thanx the d loop is already offset but I'll twist the string a bit and see what happens:shade:
 

·
No Hype, Just Hunt
Joined
·
12,419 Posts
I would start with a 1/2 twist and see what that does for you. Make sure to add the twist in the opposite direction of the peep rotation.
 

·
Registered
Joined
·
99 Posts
What about rotating single strands to get it to turn?
 

·
Registered
Joined
·
14,506 Posts
i would do a 1/2 twist too, from bottom end also and that should get u quite close to straight
 

·
Registered
Joined
·
565 Posts
Twist the string.
When you start flipping strands the chances are that you will cut one.
Putting a twist on the cam is a safer bet (and quicker).
 

·
Registered
Joined
·
2,703 Posts
Discussion Starter #8
twisted the string 1/2 turn away from the rotation perfect now thanx to all for the help
 
1 - 8 of 8 Posts
Top