Archery Talk Forum banner

Peep sight sliding..

2026 Views 3 Replies 4 Participants Last post by  mike 66
I've noticed within the last couple of days that my peep sight is sliding up pretty significantly. It's the basic elastic rubber tube, peep sight. The knots tied on the string that would normally keep it still are glued in place, otherwise i think i could probably just slide them down to where they should be. Does this have anything to do with maybe my draw length not being right? Or is there a peep sight I can replace it with that won't do this? Any suggestions? Thanks.
1 - 4 of 4 Posts

· Registered
Rytera Nemesis, Easton Pro Hunters, Muzzy 3 blade, tru-Ball hinge release.
Joined
·
2,119 Posts
Your tube is to short and its most likely tied to high on the cable, most guys serve the sight in and usually shoot non stretch strings and cables so you don't need the tube any more.
 

· Registered
Joined
·
8,438 Posts
There is no need for the alignment tubes any more. They slow down your bow by about 10 fps. The cause problems with consistency like you are having & are potential eye injuries.

Get a D loop for alignment and get rid of the tube.

Allen
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top