Archery Talk Forum banner

Press release Cougar Claw Treestands Made in USA

17K views 94 replies 28 participants last post by  kato14716  
#1 ·
Welcome to a new generation of climbing tree stands! Cougar Claw® Tree Stands start with a premium grade, all-welded aluminum frame. Then we add the finishing touches that help you stay up longer and safer; like the thickest foam seat available, a solid shooting rest, foot rest, and more underseat storage than any other tree stand

Easy-adjust extra wide backpacking straps for comfortable packing in and out.
16 adjustment configurations for perfect tree position on every climb.
Multi Strand Climbing Cable fully coated for maximum noise reduction and equipped with machined square-block ends for fast, perfect alignment even in the dark.
Noise dampened cable pins permanently attached to the stand. No noise, no lost pins.
Snap-in seat can be completely removed for a safer climb and fastened quickly and quietly at climbing height.

First pic: is the open front lightest stand offered by Cougar Claw is called Cougar's Cub Prowler
Hand Climber Dimensions: 23" W x 26 1/2" L
Weight: 17 lbs. - Rating: 300 lbs.

2nd pic :Cougar's Den II Prowler MOST POPULAR
Top Climber Dimensions: 23" W x 35" L
Weight: 19.9 lbs. - Rating: 300 lbs.

3rd pic: largest stand offered by Cougar Claw
Cougar's Bubba Prowler Top Climber Dimensions: 25 1/4" W x 38" L
Weight: 22.5 lbs. - Rating: 300 lbs.

*PLEASE PM. ME WITH ANY CONTACT INFORMATION OR QUESTIONS *
 

Attachments

#2 ·
New Leveling System offered by Cougar Claw Treestands

Cougar Claw® Tree Stands has unveiled a revolutionary new patent-pending Leveling System™ that allows hunters to level their tree stands safely while climbing up a tree.

With Cougar Claw's new system, hunters can, using pins, put their leveling cable into one hole at the bottom of the tree, then slide the cable to another hole, tightening it, any time during their climb. A second pin serves to make the stand even more secure and allows the cable to be adjusted to a tighter setting if necessary.


Cougar Claw's new Leveling System™ consists of a redesigned cable and two pins. The new yellow coating on the cable dampens noise by eliminating metal to metal contact and also helps with visibility in dim light.

This innovative new cable and pin system is standard on all new LS Cougar Claw® tree stands.
steps too level stand
1]A the beginning of the climb, both pins are in
2]If the hunter needs to level his stand, he can adjust the stand by removing the top pin.
3] Then tighten the cable and free up a new hole below the existing pins.
4]Next, the hunter simply inserts the first pin into this new hole, which secures the cable in its tightened position.
pics are in order of steps above 1-4
 

Attachments

#4 ·
I have one of each of thses stands, all i can say is they are incredible stands, easy to climb light weight and super quiet!!:D
The comfort and leveling takes stress out always worring about level you set your stand on as you started climb and seat makes them long sits so much more enjoyable..
1]first pic quiet cables *soft*
2]second pic leveling cable insert
Note:Noise dampened cable pins permanently attached to the stand. No noise, no lost pins.
 

Attachments

#10 ·
I have had two of these for several years now. They aint exactly new. Used to be out of Alabama and I think owned by Donnie Paul who used to have a rep group. Aint heard much about em lately. They are fine stands though.
 
#11 ·
Can you post a picture of one of them stacked and ready to put on your back?
 
#24 · (Edited)
*Standard with every stand we ship is a very comfortable foot rest that folds down while using and folds back up for flat packing.

*Also with every stand is a user friendly safety belt.With know loud metal clinging and very straight forward directions.I put mine on before leaving truck,very light weight.Be safe everyone,never rush your shot or your climb.
 

Attachments

#26 ·
hello deerheaven :

I'm looking for a new climber... the Cougar Claw has got my upmost interest... the level system looks to be a real winner & will help out a bunch in those times when you need just a bit more level stable platform... thick seat looks mighty comfy :thumbs_up


a quick question here...

*** as noted on the Cougar Claw website : with "Computer -Designed" climbing teeth ???

whats your thoughts ??? how to these teeth differ from other climbers ??? what makes it more solid & stable ??? any info added is much appreciated...


*** also, please try & add a "Close-Up" pic of the climber teeth... both, on & off a tree if possible...

thanks
 
#30 ·
ttt
 
#35 ·
Thanks for your support everyone....Dealers or hunter just pm with any questions.

Cougar Claw® Tree Stands provide legendary comfort and a solid feel, both critical to a successful hunt. Computer designed climbing teeth, wide, grooved cross members in the foot base, easily adjustable boot straps, and premium no-memory elastic heel straps all contribute to the best "feeling" stand you'll ever spend a day in!
 

Attachments

#37 ·
thickest foam seat available, a solid shooting rest, foot rest, and more underseat storage than any other tree stand. More standard features than any climbing stand available, including:
* Easy-adjust extra wide backpacking straps for comfortable packing in and out.

*16 adjustment configurations for perfect tree position on every climb.

*Multi Strand Climbing Cable fully coated for maximum noise reduction and equipped with machined square-block ends for fast, perfect alignment even in the dark.

*Noise dampened cable pins permanently attached to the stand. No noise, no lost pins.

*Snap-in seat can be completely removed for a safer climb and fastened quickly and quietly at climbing height.
 

Attachments

#38 ·
:bump: for a comfy looking stand! :thumbs_up