Anyone using the Primos double bull blind and ever have a ball joint pop out of the hub where all the rods come together? If so, how did you fix it? I know you can sent it back to Primos but afraid its going to cost an arm and a leg to ship it.
Coopdeville
Is it broken or did it just come out of the hub?
If it just popped out the metal plate that holds them in may be loose. It’s just held in with a screw. Just take it off and reinsert it. Check to make sure the hub isn’t cracked.
If the ball is broken or the rod damaged you can order a new rod and ball and cut to length to replace the old one. You don’t need to send the blind in.
If it just popped out the metal plate that holds them in may be loose. It’s just held in with a screw. Just take it off and reinsert it. Check to make sure the hub isn’t cracked.
If the ball is broken or the rod damaged you can order a new rod and ball and cut to length to replace the old one. You don’t need to send the blind in.
It just came out of the hub. I've tried everything i know of to get it back in, but nothing seems to be working for me.
Take the cap off. You have to take the rod all the way out and slide it through and put the other end back in the pocket.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
When you put the little ball thingy back on the end of the rod, use a little hot melt glue to keep it from popping out again....or epoxy, or whatever glue you have on hand.
If the rod broke off in the ball, you can drill it back out or just call up DB/Primos and they will send you a ziplock bag full of those little plastic balls for free.
Should all be covered under warranty.
Sent from my SM-G950U using Tapatalk
If the rod broke off in the ball, you can drill it back out or just call up DB/Primos and they will send you a ziplock bag full of those little plastic balls for free.
Should all be covered under warranty.
Sent from my SM-G950U using Tapatalk
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
