Agree completely. Love TAP stops.

 

Amen, got mine a couple weeks ago. Backwall went from “nice” to “d*mn, that feels good”. And I really like the wider profile, just feel more confident that they won’t miss the cable.

 

Why didn’t pse make this upgrade from the factory is beyond me

 

Agreed. The factory stops leave a lot to be desired. The TAP stops are perfect.

 

I went to the Bomar stops from the Lucky stops, and the jump was the same as stock to Luckys. Feels like a limb stop.

 

Which bow / cam?

 

PSE Nock 30 E2

 

Had them on my Mach 34, good stuff!

 

Anyone run these on an EC2? I’m newer to fiddling with a bow, but getting into the game. Have tools for an at home setup coming to mess with a new-to-me Mach30

 

I have these on the EC2 cams. If you decide to order the TAP draw stops (or any other brand), just be sure to select the option for the cam you have.

Install is super easy, just a t -10 driver/screw for the draw stops. Once you know your desired position, blue loc tite the screw. Beware, if you get the TAP, the titanium screws they come with are a touch longer than stock. Depending on your module position, the protruding screw may interfere with the cam (I just use the stock screw, nbd).

 

Single best evolve cam upgrade

 

Yes use the stock screws or you will mess up the cam if in certain draw lengths!

 

I will be ordering two sets of these real soon.

 

Love these TAP draw stops. I listed my Bomar stops and will keep these on both bows.

 

I love all the upgrades from TAP are well worth it for the PSE bows. I did the stops, along with the cable slide and wow it made a difference in the overall feel of the bow

 

I have TAP stops on one of my PSE's and Bomars on the other two. I prefer the Bomar stops. All good, but def a better back wall.

 

Well just ordered two sets. I’ll compare to the Bomar stops I have now.

 

Looking to get a shoot down and I will be putting these on now thanks!

 

I think the pse stops are great

 

I use to use Bomar stops on all my bows ...very solid back wall ..but went back to PSE's stops,
I like the quietness of the factory stops for hunting ...

 

I like a soft spongy wall I have no clue how guys can shoot a bow with a solid back wall I’d be awful lol

 

Got some new draw stops from TAP and installed them today.

Really changed out this bow feels at full draw.
Worth the $40 in my opinion. Seems to hold better and doesn’t hang low.

Thanks for posting that! I have a PSE carbon stealth 33 that is all stock except for the strings. The bow occasionally comes off full draw when I’m holding ( but before release)
Would the TAP stops help that problem?

 

What’s the best way to get in touch with TAP? Tried before but didn’t have any luck. TIA

 

He lists his cell number on his website and always texts me back in minutes.

 

I just pulled the rubber out of my factory stops and they've been great.