Archery Talk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter #1
With a QAD that is served in...say you go from a 6.5 to 6mm arrow, do you need to re-adjust and serve it back in? Or is there not enough difference to really notice and just shoot it.
 

·
Registered
Joined
·
1,580 Posts
If you need to adjust your QAD up or down...no need to re-serve it in. Loosin the bolt that snugs down the activator cord and reset as needed...then re-secure the bolt back down. Should be good to go as long as you have a little bit of the tag end to play with. Hope that makes sense.
 
Joined
·
9,034 Posts
Hi,
The bow would really need to be re-tuned but you could get away with it. As stated in the previous post, you can simply adjust the height via the vertical adjustment. I think this is what you were asking. Cheers!
Fred
 
1 - 4 of 4 Posts
Top